Home >> Lathes >> PROMPT >> PROMPT MH-70A AXIAL BARUFFALDI TURRET VDI40 SPUR-MT TBMA200 TURRET ANY, VDI 40, SPUR-MT,

PROMPT MH-70A AXIAL BARUFFALDI TURRET VDI40 SPUR-MT TBMA200 TURRET ANY, VDI 40, SPUR-MT,


PROMPT MH-70A AXIAL BARUFFALDI TURRET VDI40 SPUR-MT TBMA200

Tool holders for PROMPT MH-70A AXIAL BARUFFALDI TURRET VDI40 SPUR-MT TBMA200.We will find a tool holder for PROMPT MH-70A AXIAL BARUFFALDI TURRET VDI40 SPUR-MT TBMA200.

ANY, VDI 40, SPUR-MT,

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=( 1)" L=44 mm

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=( 1)" L=44 mm

In Stock 6

VDI40 FORM C1 TURNING HOLDER RIGHT H=25 mm L=42.5 mm

VDI40 FORM C1 TURNING HOLDER RIGHT H=25 mm L=42.5 mm

In Stock 6

VDI40 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm

In Stock 6

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=44 mm

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=44 mm

In Stock 5

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=25 mm L=44 mm

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=25 mm L=44 mm

In Stock 5

VDI40 FORM E1 U-DRILL HOLDER ID=32 mm L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=32 mm L=75 mm

In Stock 5

VDI40 FORM E2 BORING BAR HOLDER ID=12 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=12 mm L=75 mm

In Stock 5

VDI40 FORM E2 BORING BAR HOLDER ID=16 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=16 mm L=75 mm

In Stock 5

VDI40 FORM E2 BORING BAR HOLDER ID=20 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=20 mm L=75 mm

In Stock 5

VDI40 FORM E2 BORING BAR HOLDER ID=32 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=32 mm L=75 mm

In Stock 4

VDI40 WEDGE ECCENTRIC OD=28 mm

VDI40 WEDGE ECCENTRIC OD=28 mm

In Stock 4

VDI40 FORM E1 U-DRILL HOLDER ID=25 mm L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=25 mm L=75 mm

In Stock 3

VDI40 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=75 mm

In Stock 3

VDI40 FORM E2 BORING BAR HOLDER ID=10 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=10 mm L=75 mm

In Stock 3

VDI40 FORM E4 COLLET CHUCK ER40 INTERNAL COOLANT L=75 mm

VDI40 FORM E4 COLLET CHUCK ER40 INTERNAL COOLANT L=75 mm

In Stock 3

VDI40 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

VDI40 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

In Stock 3

VDI40 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

VDI40 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

In Stock 3

VDI40 FORM F MORSE TAPER MT4 ADAPTER L=80 mm

VDI40 FORM F MORSE TAPER MT4 ADAPTER L=80 mm

In Stock 3

VDI40 FORM Z2 PLUG PLASTIC OD=82 mm L=20 mm

VDI40 FORM Z2 PLUG PLASTIC OD=82 mm L=20 mm

In Stock 3

VDI40 FORM E2 BORING BAR HOLDER ID=( 1)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1)" L=75 mm

In Stock 2

VDI40 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=75 mm

In Stock 2

VDI40 FORM E2 BORING BAR HOLDER ID=25 mm L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=25 mm L=75 mm

In Stock 2

VDI40 FORM E4 COLLET CHUCK ER40 L=75 mm

VDI40 FORM E4 COLLET CHUCK ER40 L=75 mm

In Stock 2

VDI40 TEST BAR Z AXIS L=200 mm

VDI40 TEST BAR Z AXIS L=200 mm

In Stock 2

VDI40 COMPENSATING TAPPING COLLET CHUCK ER25 L=73 mm

VDI40 COMPENSATING TAPPING COLLET CHUCK ER25 L=73 mm

In Stock 1

VDI40 FORM Z2 PLUG STEEL CUT SIDE

VDI40 FORM Z2 PLUG STEEL CUT SIDE

In Stock 1

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=112 mm

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=112 mm

In Stock 1

O-RING FOR VDI30 SHANK

O-RING FOR VDI30 SHANK

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=25 mm L=55 mm

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=25 mm L=55 mm

VDI40 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm RIGHT HAND

VDI40 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm RIGHT HAND

VDI40 CUT OFF HOLDER TYPE 1 H=32 mm L=56 mm LEFT HAND

VDI40 CUT OFF HOLDER TYPE 1 H=32 mm L=56 mm LEFT HAND

VDI40 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm LEFT HAND

VDI40 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm LEFT HAND

VDI40 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm RIGHT HAND

VDI40 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm RIGHT HAND

VDI40 FORM A1 BLANK H=151 mm L=150 mm

VDI40 FORM A1 BLANK H=151 mm L=150 mm

VDI40 FORM A1 BLANK L=100 mm H=151 mm

VDI40 FORM A1 BLANK L=100 mm H=151 mm

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1)" L=44 mm

VDI40 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1)" L=44 mm

VDI40 FORM B2 TURNING HOLDER LEFT SHORT H=( 1)" L=44 mm

VDI40 FORM B2 TURNING HOLDER LEFT SHORT H=( 1)" L=44 mm

VDI40 FORM B2 TURNING HOLDER LEFT SHORT H=25 mm L=44 mm

VDI40 FORM B2 TURNING HOLDER LEFT SHORT H=25 mm L=44 mm

VDI40 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1)" L=44 mm

VDI40 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1)" L=44 mm

VDI40 FORM B3 TURNING HOLDER RIGHT SHORT H=25 mm L=44 mm

VDI40 FORM B3 TURNING HOLDER RIGHT SHORT H=25 mm L=44 mm

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=( 1)" L=55 mm

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=( 1)" L=55 mm

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=25 mm L=44 mm

VDI40 FORM B4 TURNING HOLDER LEFT SHORT H=25 mm L=44 mm

VDI40 FORM B5 TURNING HOLDER RIGHT LONG H=( 1)" L=44 mm

VDI40 FORM B5 TURNING HOLDER RIGHT LONG H=( 1)" L=44 mm

VDI40 FORM B5 TURNING HOLDER RIGHT LONG H=25 mm L=44 mm

VDI40 FORM B5 TURNING HOLDER RIGHT LONG H=25 mm L=44 mm

VDI40 FORM B6 TURNING HOLDER LEFT LONG H=( 1)" L=44 mm

VDI40 FORM B6 TURNING HOLDER LEFT LONG H=( 1)" L=44 mm

VDI40 FORM B6 TURNING HOLDER LEFT LONG H=25 mm L=44 mm

VDI40 FORM B6 TURNING HOLDER LEFT LONG H=25 mm L=44 mm

VDI40 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1)" L=44 mm

VDI40 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1)" L=44 mm

VDI40 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=25 mm L=44 mm

VDI40 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=25 mm L=44 mm

VDI40 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1)" L=44 mm

VDI40 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1)" L=44 mm

VDI40 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=25 mm L=44 mm

VDI40 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=25 mm L=44 mm

VDI40 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=85 mm

VDI40 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=85 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1)" L=100 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1)" L=100 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" (with spacer) L=100 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" (with spacer) L=100 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=25 mm L=100 mm

VDI40 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=25 mm L=100 mm

VDI40 FORM C2 AXIAL TURNING HOLDER H=25 mm BORING BAR ID=25 mm L=75 mm

VDI40 FORM C2 AXIAL TURNING HOLDER H=25 mm BORING BAR ID=25 mm L=75 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=48 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=48 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=98 mm W=76 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=98 mm W=76 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=48 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=48 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=98 mm W=76 mm

VDI40 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=98 mm W=76 mm

VDI40 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1)" L=100 mm

VDI40 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1)" L=100 mm

VDI40 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=25 mm L=100 mm

VDI40 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=25 mm L=100 mm

VDI40 FORM C3 B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1)" L=100 mm

VDI40 FORM C3 B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1)" L=100 mm

VDI40 FORM C3 B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=25 mm L=100 mm

VDI40 FORM C3 B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=25 mm L=100 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=( 1)" L=43 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=( 1)" L=43 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=( 1)" L=98 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=( 1)" L=98 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=25 mm L=43 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=25 mm L=43 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=25 mm L=98 mm

VDI40 FORM C3 TURNING HOLDER RIGHT H=25 mm L=98 mm

VDI40 FORM C4 TURNING HOLDER LEFT DOUBLE x2 H=25 mm L=98 mm

VDI40 FORM C4 TURNING HOLDER LEFT DOUBLE x2 H=25 mm L=98 mm

VDI40 FORM C4 TURNING HOLDER LEFT H=( 1)" L=48 mm

VDI40 FORM C4 TURNING HOLDER LEFT H=( 1)" L=48 mm

VDI40 FORM C4 TURNING HOLDER LEFT H=( 1)" L=48 mm SP

VDI40 FORM C4 TURNING HOLDER LEFT H=( 1)" L=48 mm SP

VDI40 FORM C4 TURNING HOLDER LEFT H=25 mm L=48 mm

VDI40 FORM C4 TURNING HOLDER LEFT H=25 mm L=48 mm

VDI40 FORM C4 TURNING HOLDER LEFT H=25 mm L=90 mm SP

VDI40 FORM C4 TURNING HOLDER LEFT H=25 mm L=90 mm SP

VDI40 FORM C4 TURNING HOLDER QUADRUPLE x4 H=25 mm L=98 mm

VDI40 FORM C4 TURNING HOLDER QUADRUPLE x4 H=25 mm L=98 mm

VDI40 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1)" L=100 mm

VDI40 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1)" L=100 mm

VDI40 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=25 mm L=100 mm

VDI40 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=25 mm L=100 mm

VDI40 FORM D1 D2 DOUBLE TURNING HOLDER H=( 1)" L=46 mm

VDI40 FORM D1 D2 DOUBLE TURNING HOLDER H=( 1)" L=46 mm

VDI40 FORM D1 D2 DOUBLE TURNING HOLDER H=25 mm L=46 mm

VDI40 FORM D1 D2 DOUBLE TURNING HOLDER H=25 mm L=46 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=( 1)" L=72 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=( 1)" L=72 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=25 mm L=63 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=25 mm L=63 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=25 mm L=72 mm

VDI40 FORM D1 TRIPLE TURNING HOLDER H=25 mm L=72 mm

VDI40 FORM D2 TURNING HOLDER H=( 1)" L=72 mm

VDI40 FORM D2 TURNING HOLDER H=( 1)" L=72 mm

VDI40 FORM D2 TURNING HOLDER H=25 mm L=72 mm

VDI40 FORM D2 TURNING HOLDER H=25 mm L=72 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1)" L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 1)" L=75 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 5/ 8)" L=64 mm

VDI40 FORM E1 U-DRILL HOLDER ID=( 5/ 8)" L=64 mm

VDI40 FORM E1 U-DRILL HOLDER ID=16 mm L=64 mm

VDI40 FORM E1 U-DRILL HOLDER ID=16 mm L=64 mm

VDI40 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI40 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI40 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

VDI40 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 2)" L=100 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 2)" L=100 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=75 mm

VDI40 FORM E2 BORING BAR HOLDER ID=40 mm L=85 mm

VDI40 FORM E2 BORING BAR HOLDER ID=40 mm L=85 mm

VDI40 FORM E2 BORING BAR HOLDER ID=50 mm L=100 mm

VDI40 FORM E2 BORING BAR HOLDER ID=50 mm L=100 mm

VDI40 FORM E2 BORING BAR HOLDER RIGHT ID=40 mm L=65 mm

VDI40 FORM E2 BORING BAR HOLDER RIGHT ID=40 mm L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 2)" x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 2)" x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 2)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 2)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 4)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=( 1- 1/ 4)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=32 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=32 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=32 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=32 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=40 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT ID=40 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT x2 ID=40 mm L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER LEFT x2 ID=40 mm L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=( 1- 1/ 2)" x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=( 1- 1/ 2)" x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=( 1- 1/ 4)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=( 1- 1/ 4)" x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=(1-1/2)"x2 OFFSET L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=(1-1/2)"x2 OFFSET L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=32 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=32 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=32 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=32 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=40 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=40 mm x2 L=65 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=40 mm x2 L=90 mm

VDI40 FORM E2 DOUBLE BORING BAR HOLDER RIGHT ID=40 mm x2 L=90 mm

VDI40 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI40 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI40 FORM E3 COLLET CHUCK OZ32 L=90 mm

VDI40 FORM E3 COLLET CHUCK OZ32 L=90 mm

VDI40 FORM E4 COLLET CHUCK ER25 INTERNAL EXTERNAL COOLANT L=75 mm

VDI40 FORM E4 COLLET CHUCK ER25 INTERNAL EXTERNAL COOLANT L=75 mm

VDI40 FORM E4 COLLET CHUCK ER25 L=75 mm

VDI40 FORM E4 COLLET CHUCK ER25 L=75 mm

VDI40 FORM E4 COLLET CHUCK ER32 INTERNAL EXTERNAL COOLANT L=75 mm

VDI40 FORM E4 COLLET CHUCK ER32 INTERNAL EXTERNAL COOLANT L=75 mm

VDI40 FORM F MORSE TAPER MT1 ADAPTER L=36 mm

VDI40 FORM F MORSE TAPER MT1 ADAPTER L=36 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=120 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=120 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=140 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=140 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=120 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=120 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L= 85 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=140 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=140 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=85 mm P=56 mm

VDI40 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=85 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 2)" L=100 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 2)" L=100 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L= 90 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L= 90 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=125 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=125 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L= 90 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L= 90 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L= 90 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L= 90 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=100 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=100 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=100 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=120 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=40 mm L=120 mm W=48 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1- 1/ 2)" x2 L=100 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1- 1/ 2)" x2 L=100 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1- 1/ 4)" x2 L=90 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1- 1/ 4)" x2 L=90 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=125 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=125 mm P=56 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=125 mm W=48 mm INT COOLANT

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=125 mm W=48 mm INT COOLANT

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 3/ 4)" x2 L=120 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 3/ 4)" x2 L=120 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 3/ 4)" x2 L=125 mm

VDI40 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 3/ 4)" x2 L=125 mm

VDI40 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=( 1- 1/ 4)" x3 L=40 mm

VDI40 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=( 1- 1/ 4)" x3 L=40 mm

VDI40 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=32 mm x3 L=40 mm

VDI40 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=32 mm x3 L=40 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 85mm W=48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 85mm W=48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 85mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 85mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=(1-1/2)" L= 85mm W=48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=(1-1/2)" L= 85mm W=48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=(1-1/2)" L=100 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=(1-1/2)" L=100 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L= 85 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L= 85 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=100 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=100 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=100 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=100 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=120 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=120 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=120 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=120 mm W48

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=85 mm

VDI40 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER32 BORING BAR HOLDER ID=40 mm L=85 mm

VDI40 FORM Z2 PLUG STEEL ROUND OD=83 mm L=20 mm

VDI40 FORM Z2 PLUG STEEL ROUND OD=83 mm L=20 mm

VDI40 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI40 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI40 KEYLESS DRILL CHUCK ID=16 mm L=102 mm

VDI40 KEYLESS DRILL CHUCK ID=16 mm L=102 mm

VDI40 SPUR MT RADIAL LEFT HAND TAPPING HEAD ER20 L= 65 mm CW-CCW

VDI40 SPUR MT RADIAL LEFT HAND TAPPING HEAD ER20 L= 65 mm CW-CCW

VDI40 SPUR MT RADIAL LEFT HAND TAPPING HEAD ER20 L= 65 mm CW-CW

VDI40 SPUR MT RADIAL LEFT HAND TAPPING HEAD ER20 L= 65 mm CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 65 mm RIGHT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 65 mm RIGHT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 65 mm RIGHT HAND CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 65 mm RIGHT HAND CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm LEFT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm LEFT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm LEFT HAND CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm LEFT HAND CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm RIGHT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm RIGHT HAND CW-CCW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm RIGHT HAND CW-CW

VDI40 SPUR MT RADIAL TAPPING HEAD ER20 L= 85 mm RIGHT HAND CW-CW

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=122 mm INTERNAL COOLANT

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=122 mm INTERNAL COOLANT

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=93 mm COMPACT

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 L=93 mm COMPACT

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 OFFSET L= 50 mm

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32 OFFSET L= 50 mm

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32A L=108 mm INTERNAL COOLANT

VDI40 SPUR-MT AXIAL DRILLING MILLING HEAD ER32A L=108 mm INTERNAL COOLANT

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 16 mm L=89 mm

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 16 mm L=89 mm

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=92 mm

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=92 mm

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 30 mm L=118 mm

VDI40 SPUR-MT AXIAL FACING MILLING HEAD OD= 30 mm L=118 mm

VDI40 SPUR-MT AXIAL TAPPING HEAD ER20 L= 96 mm COMPACT

VDI40 SPUR-MT AXIAL TAPPING HEAD ER20 L= 96 mm COMPACT

VDI40 SPUR-MT HOBBING HEAD OD=( 1)" L=111 mm LEFT HAND

VDI40 SPUR-MT HOBBING HEAD OD=( 1)" L=111 mm LEFT HAND

VDI40 SPUR-MT HOBBING HEAD OD=( 1)" L=111 mm RIGHT HAND

VDI40 SPUR-MT HOBBING HEAD OD=( 1)" L=111 mm RIGHT HAND

VDI40 SPUR-MT HOBBING HEAD OD=16 mm L=111 mm LEFT HAND

VDI40 SPUR-MT HOBBING HEAD OD=16 mm L=111 mm LEFT HAND

VDI40 SPUR-MT HOBBING HEAD OD=16 mm L=111 mm RIGHT HAND

VDI40 SPUR-MT HOBBING HEAD OD=16 mm L=111 mm RIGHT HAND

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD DOUBLE 2xER32 L= 85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD DOUBLE 2xER32 L= 85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD DOUBLE 2xER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD DOUBLE 2xER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=120 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=120 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND DOUBLE 2xER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=100 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=100 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=65 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=65 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=65 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=65 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm INTERNAL COOLANT

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=85 mm INTERNAL COOLANT

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=90mm BACK SET 44mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER32 L=90mm BACK SET 44mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND BACK SET ER32 L=90 mm NARROW BODY

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND BACK SET ER32 L=90 mm NARROW BODY

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L= 90 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L= 90 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=100 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=100 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=100 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=120 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=120 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=65 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=65 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=65 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=65 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm CW-CW

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm INTERNAL COOLANT

VDI40 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER32 L=85 mm INTERNAL COOLANT

VDI40 SPUR-MT RADIAL TAPPING HEAD LEFT HAND ER20 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL TAPPING HEAD LEFT HAND ER20 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL TAPPING HEAD LEFT HAND ER20 L=90 mm BACK SET CW-CW

VDI40 SPUR-MT RADIAL TAPPING HEAD LEFT HAND ER20 L=90 mm BACK SET CW-CW

VDI40 SPUR-MT RADIAL TAPPING HEAD RIGHT HAND ER20 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL TAPPING HEAD RIGHT HAND ER20 L= 90 mm BACK SET NARROW BODY

VDI40 SPUR-MT RADIAL TAPPING HEAD RIGHT HAND ER20 L=90 mm BACK SET CW-CW

VDI40 SPUR-MT RADIAL TAPPING HEAD RIGHT HAND ER20 L=90 mm BACK SET CW-CW

VDI40 SPUR-MT UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER25 L=135 mm

VDI40 SPUR-MT UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER25 L=135 mm

VDI40 TEST BAR X AXIS L=100 mm

VDI40 TEST BAR X AXIS L=100 mm

VDI40 TEST BAR Z AXIS L=100 mm

VDI40 TEST BAR Z AXIS L=100 mm

VDI40 TEST BAR Z AXIS L=115 mm

VDI40 TEST BAR Z AXIS L=115 mm

VDI40 TEST BAR Z AXIS L=150 mm

VDI40 TEST BAR Z AXIS L=150 mm

Not found?

Give us more details about your machine

* Fields are required



We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies