Home >> Lathes >> SCHERER FEINBAU >> SCHERER FEINBAU VDZ-200 TURRET SAUTER RADIAL VDI30 DIN5480 TURRET ANY, VDI 30, DIN5480 SAUTER, ANY

SCHERER FEINBAU VDZ-200 TURRET SAUTER RADIAL VDI30 DIN5480 TURRET ANY, VDI 30, DIN5480 SAUTER, ANY


SCHERER FEINBAU VDZ-200 TURRET SAUTER RADIAL VDI30 DIN5480

Tool holders for SCHERER FEINBAU VDZ-200 TURRET SAUTER RADIAL VDI30 DIN5480.We will find a tool holder for SCHERER FEINBAU VDZ-200 TURRET SAUTER RADIAL VDI30 DIN5480.

ANY, VDI 30, DIN5480 SAUTER, ANY

VDI30 FORM Z2 PLUG PLASTIC OD=68 mm L=16 mm

VDI30 FORM Z2 PLUG PLASTIC OD=68 mm L=16 mm

In Stock 20

VDI30 FORM C1 TURNING HOLDER RIGHT H=20 mm L=35 mm

VDI30 FORM C1 TURNING HOLDER RIGHT H=20 mm L=35 mm

In Stock 9

VDI30 WEDGE ECCENTRIC OD=22 mm

VDI30 WEDGE ECCENTRIC OD=22 mm

In Stock 8

VDI30 FORM B1 TURNING HOLDER RIGHT SHORT H=20 mm L=40 mm

VDI30 FORM B1 TURNING HOLDER RIGHT SHORT H=20 mm L=40 mm

In Stock 6

VDI30 FORM C1 TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

VDI30 FORM C1 TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

In Stock 6

VDI30 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=60 mm

In Stock 6

VDI30 FORM E2 BORING BAR HOLDER ID=10 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=10 mm L=60 mm

In Stock 6

VDI30 FORM B1 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B1 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=40 mm

In Stock 5

VDI30 FORM Z2 PLUG STEEL OD=68 mm L=16 mm

VDI30 FORM Z2 PLUG STEEL OD=68 mm L=16 mm

In Stock 5

VDI30 FORM E2 BORING BAR HOLDER ID=20 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=20 mm L=60 mm

In Stock 4

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=20 mm L=40 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=20 mm L=40 mm

In Stock 3

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=20 mm L=40 mm

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=20 mm L=40 mm

In Stock 3

VDI30 FORM E1 U-DRILL HOLDER ID=32 mm L=75 mm

VDI30 FORM E1 U-DRILL HOLDER ID=32 mm L=75 mm

In Stock 3

VDI30 FORM E2 BORING BAR HOLDER ID=( 1)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 1)" L=60 mm

In Stock 3

VDI30 FORM E2 BORING BAR HOLDER ID=16 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=16 mm L=60 mm

In Stock 3

VDI30 FORM E2 BORING BAR HOLDER ID=32 mm L=85 mm

VDI30 FORM E2 BORING BAR HOLDER ID=32 mm L=85 mm

In Stock 3

VDI30 FORM E4 COLLET CHUCK ER25 INTERNAL COOLANT L=75 mm

VDI30 FORM E4 COLLET CHUCK ER25 INTERNAL COOLANT L=75 mm

In Stock 3

VDI30 FORM E4 COLLET CHUCK ER32 EXTERNAL INTERNAL COOLANT L=75 mm

VDI30 FORM E4 COLLET CHUCK ER32 EXTERNAL INTERNAL COOLANT L=75 mm

In Stock 3

VDI30 FORM A1 BLANK H=130 mm L= 85 mm

VDI30 FORM A1 BLANK H=130 mm L= 85 mm

In Stock 2

VDI30 FORM C2 TURNING HOLDER LEFT H=20 mm L=41 mm

VDI30 FORM C2 TURNING HOLDER LEFT H=20 mm L=41 mm

In Stock 2

VDI30 FORM E1 U-DRILL HOLDER ID=25 mm L=71 mm

VDI30 FORM E1 U-DRILL HOLDER ID=25 mm L=71 mm

In Stock 2

VDI30 FORM C4 TURNING HOLDER LEFT H=( 3/ 4)" L=41 mm

VDI30 FORM C4 TURNING HOLDER LEFT H=( 3/ 4)" L=41 mm

In Stock 1

VDI30 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=60 mm

In Stock 1

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=( 1)" x3 L=128 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER ID=( 1)" x3 L=128 mm

In Stock 1

VDI30 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI30 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

In Stock 1

VDI30 TEST BAR Z AXIS L=200 mm

VDI30 TEST BAR Z AXIS L=200 mm

In Stock 1

VDI16 FORM E4 COLLET CHUCK ER16 L=50 mm

VDI16 FORM E4 COLLET CHUCK ER16 L=50 mm

VDI20 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER16 L=50 mm

VDI20 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER16 L=50 mm

VDI20 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER16 L=50 mm

VDI20 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER16 L=50 mm

VDI20 DIN5480 RADIAL TAPPING HEAD ER16 L=65 mm BACK SET 72.5 mm LEFT HAND CW-CW

VDI20 DIN5480 RADIAL TAPPING HEAD ER16 L=65 mm BACK SET 72.5 mm LEFT HAND CW-CW

VDI30 COLLET CHUCK COMPENSATING TAPPING ER25 mm L=68 mm

VDI30 COLLET CHUCK COMPENSATING TAPPING ER25 mm L=68 mm

VDI30 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm LEFT HAND

VDI30 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm LEFT HAND

VDI30 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm RIGHT HAND

VDI30 CUT OFF HOLDER TYPE 1 H=26 mm L=56 mm RIGHT HAND

VDI30 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm LEFT HAND

VDI30 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm LEFT HAND

VDI30 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm RIGHT HAND

VDI30 CUT OFF HOLDER TYPE 2 H=26 mm L=48 mm RIGHT HAND

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER16 L= 80 mm COMPACT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER16 L= 80 mm COMPACT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER16x2 Y AXIS L= 83 mm

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER16x2 Y AXIS L= 83 mm

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=101 mm

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=101 mm

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=101 mm INTERNAL COOLANT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=101 mm INTERNAL COOLANT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=70 mm INTEGRATED COLLET

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=70 mm INTEGRATED COLLET

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=89 mm COMPACT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25 L=89 mm COMPACT

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25A OFFSET L= 50 mm LEFT HAND

VDI30 DIN5480 AXIAL DRILLING MILLING HEAD ER25A OFFSET L= 50 mm LEFT HAND

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 29 mm SPEEDER 1:2

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 29 mm SPEEDER 1:2

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 35 mm CW-CCW

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 35 mm CW-CCW

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 50 mm LEFT HAND

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L= 50 mm LEFT HAND

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=29 mm RIGHT HAND

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=29 mm RIGHT HAND

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm INTERNAL COOLANT

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm INTERNAL COOLANT

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm SPEEDER 1:2

VDI30 DIN5480 AXIAL DRILLING-MILLING HEAD ER25 OFFSET L=50 mm SPEEDER 1:2

VDI30 DIN5480 AXIAL FACING MILLING HEAD OD=16 mm L=103 mm

VDI30 DIN5480 AXIAL FACING MILLING HEAD OD=16 mm L=103 mm

VDI30 DIN5480 AXIAL TAPPING COMPENSATING HEAD ER16 L=109 mm

VDI30 DIN5480 AXIAL TAPPING COMPENSATING HEAD ER16 L=109 mm

VDI30 DIN5480 HOBBING HEAD OD=16 mm L=109 mm LEFT HAND

VDI30 DIN5480 HOBBING HEAD OD=16 mm L=109 mm LEFT HAND

VDI30 DIN5480 HOBBING HEAD OD=16 mm L=109 mm RIGHT HAND

VDI30 DIN5480 HOBBING HEAD OD=16 mm L=109 mm RIGHT HAND

VDI30 DIN5480 HOBBING HEAD OD=25.4 mm L=109 mm LEFT HAND

VDI30 DIN5480 HOBBING HEAD OD=25.4 mm L=109 mm LEFT HAND

VDI30 DIN5480 HOBBING HEAD OD=25.4 mm L=109 mm RIGHT HAND

VDI30 DIN5480 HOBBING HEAD OD=25.4 mm L=109 mm RIGHT HAND

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE 2xER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE 2xER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE 2xER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE 2xER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE ER25x2 L= 85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE ER25x2 L= 85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE ER25x2 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD DOUBLE ER25x2 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER16 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER16 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=100 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=100 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=55 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=55 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=55 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=55 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=72 mm BACK SET

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=72 mm BACK SET

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=85 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD LEFT HAND ER25 L=85 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=100 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=100 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=100 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=55 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=55 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=55 mm INTERNL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=55 mm INTERNL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=69 mm BACK SET

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=69 mm BACK SET

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=72 mm BACK SET 41.5 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=72 mm BACK SET 41.5 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=72 mm BACK SET 43 mm INT COOL

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=72 mm BACK SET 43 mm INT COOL

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=85 mm

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=85 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL DRILLING MILLING HEAD RIGHT HAND ER25 L=85 mm INTERNAL COOLANT CW-CW

VDI30 DIN5480 RADIAL FACING MILLING HEAD OD=16 mm L=55 mm LEFT HAND

VDI30 DIN5480 RADIAL FACING MILLING HEAD OD=16 mm L=55 mm LEFT HAND

VDI30 DIN5480 RADIAL FACING MILLING HEAD OD=16 mm L=55 mm RIGHT HAND

VDI30 DIN5480 RADIAL FACING MILLING HEAD OD=16 mm L=55 mm RIGHT HAND

VDI30 DIN5480 RADIAL TAPPING HEAD ER16 L=72 mm BACK SET 44 mm LEFT HAND CW-CW

VDI30 DIN5480 RADIAL TAPPING HEAD ER16 L=72 mm BACK SET 44 mm LEFT HAND CW-CW

VDI30 DIN5480 RADIAL TAPPING HEAD ER16 L=72 mm BACK SET 44 mm RIGHT HAND CW-CW

VDI30 DIN5480 RADIAL TAPPING HEAD ER16 L=72 mm BACK SET 44 mm RIGHT HAND CW-CW

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L= 55 mm

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L= 55 mm

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L= 85 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L= 85 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L=100 mm

VDI30 DIN5480 RADIAL TAPPING HEAD LEFT HAND ER16 L=100 mm

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L= 55 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L= 55 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L= 85 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L= 85 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L=100 mm CW-CCW

VDI30 DIN5480 RADIAL TAPPING HEAD RIGHT HAND ER16 L=100 mm CW-CCW

VDI30 DIN5480 UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER20 L=121 mm

VDI30 DIN5480 UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER20 L=121 mm

VDI30 FORM A2 BLANK OD=68 mm L=240 mm

VDI30 FORM A2 BLANK OD=68 mm L=240 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=100 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=100 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=20 mm L=100 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=20 mm L=100 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=20 mm L=40 mm

VDI30 FORM B2 TURNING HOLDER LEFT SHORT H=20 mm L=40 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1)" L=45 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1)" L=45 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=25 mm L=45 mm

VDI30 FORM B3 TURNING HOLDER RIGHT SHORT H=25 mm L=45 mm

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B4 TURNING HOLDER LEFT SHORT H=( 3/ 4)" L=40 mm

VDI30 FORM B5 TURNING HOLDER RIGHT LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B5 TURNING HOLDER RIGHT LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B5 TURNING HOLDER RIGHT LONG H=20 mm L=40 mm

VDI30 FORM B5 TURNING HOLDER RIGHT LONG H=20 mm L=40 mm

VDI30 FORM B6 TURNING HOLDER LEFT LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B6 TURNING HOLDER LEFT LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B6 TURNING HOLDER LEFT LONG H=20 mm L=40 mm

VDI30 FORM B6 TURNING HOLDER LEFT LONG H=20 mm L=40 mm

VDI30 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=20 mm L=40 mm

VDI30 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=20 mm L=40 mm

VDI30 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 3/ 4)" L=40 mm

VDI30 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=20 mm L=40 mm

VDI30 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=20 mm L=40 mm

VDI30 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

VDI30 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

VDI30 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=20 mm L=70 mm

VDI30 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=20 mm L=70 mm

VDI30 FORM C2 TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C2 TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=20 mm L=70 mm

VDI30 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=20 mm L=70 mm

VDI30 FORM C3 TURNING HOLDER RIGHT H=( 3/ 4)" L=35 mm

VDI30 FORM C3 TURNING HOLDER RIGHT H=( 3/ 4)" L=35 mm

VDI30 FORM C3 TURNING HOLDER RIGHT H=20 mm L=35 mm

VDI30 FORM C3 TURNING HOLDER RIGHT H=20 mm L=35 mm

VDI30 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

VDI30 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 3/ 4)" L=70 mm

VDI30 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=20 mm L=70 mm

VDI30 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=20 mm L=70 mm

VDI30 FORM C4 TURNING HOLDER LEFT H=20 mm L=41 mm

VDI30 FORM C4 TURNING HOLDER LEFT H=20 mm L=41 mm

VDI30 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 3/ 4)" L=70 mm

VDI30 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=20 mm L=70 mm

VDI30 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=20 mm L=70 mm

VDI30 FORM D1 D2 QUADRUPLE TURNING HOLDER H=( 3/ 4)" L=38 mm

VDI30 FORM D1 D2 QUADRUPLE TURNING HOLDER H=( 3/ 4)" L=38 mm

VDI30 FORM D1 D2 QUADRUPLE TURNING HOLDER H=20 mm L=38 mm

VDI30 FORM D1 D2 QUADRUPLE TURNING HOLDER H=20 mm L=38 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=( 3/ 4)" L=60 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=( 3/ 4)" L=60 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=( 3/ 4)" L=90 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=( 3/ 4)" L=90 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=20 mm L=60 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=20 mm L=60 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=20 mm L=90 mm

VDI30 FORM D1 TRIPLE TURNING HOLDER H=20 mm L=90 mm

VDI30 FORM D2 TRIPLE TURNING HOLDER H=( 3/ 4)" L=60 mm

VDI30 FORM D2 TRIPLE TURNING HOLDER H=( 3/ 4)" L=60 mm

VDI30 FORM D2 TRIPLE TURNING HOLDER H=20 mm L=42 mm

VDI30 FORM D2 TRIPLE TURNING HOLDER H=20 mm L=42 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 1)" L=71 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 1)" L=71 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 5/ 8)" L=64 mm

VDI30 FORM E1 U-DRILL HOLDER ID=( 5/ 8)" L=64 mm

VDI30 FORM E1 U-DRILL HOLDER ID=16 mm L=66 mm

VDI30 FORM E1 U-DRILL HOLDER ID=16 mm L=66 mm

VDI30 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI30 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI30 FORM E2 BORING BAR HOLDER ID= 8 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID= 8 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=75 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 5/16)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=( 5/16)" L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=12 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=12 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=25 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=25 mm L=60 mm

VDI30 FORM E2 BORING BAR HOLDER ID=25 mm L=60 mm HIGH PRESSURE EXTERNAL COOLANT

VDI30 FORM E2 BORING BAR HOLDER ID=25 mm L=60 mm HIGH PRESSURE EXTERNAL COOLANT

VDI30 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI30 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI30 FORM E4 COLLET CHUCK ER25 L=75 mm

VDI30 FORM E4 COLLET CHUCK ER25 L=75 mm

VDI30 FORM E4 COLLET CHUCK ER32 EXTERNAL COOLANT L=75 mm

VDI30 FORM E4 COLLET CHUCK ER32 EXTERNAL COOLANT L=75 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER LEFT HAND x2 ID=( 1)" L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER LEFT HAND x2 ID=( 1)" L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER LEFT HAND x2 ID=25 mm L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER LEFT HAND x2 ID=25 mm L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER RIGHT HAND ID=( 1)" x2 L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER RIGHT HAND ID=( 1)" x2 L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER RIGHT HAND ID=25 mm x2 L=35 mm

VDI30 FORM E7 BORING BAR DOUBLE HOLDER RIGHT HAND ID=25 mm x2 L=35 mm

VDI30 FORM E7 BORING BAR TRIPLE HOLDER RIGHT HAND ID=25 mm x1 ID=20 mm x2 L=72 mm

VDI30 FORM E7 BORING BAR TRIPLE HOLDER RIGHT HAND ID=25 mm x1 ID=20 mm x2 L=72 mm

VDI30 FORM F MORSE TAPER MT1 ADAPTER L=27 mm

VDI30 FORM F MORSE TAPER MT1 ADAPTER L=27 mm

VDI30 FORM F MORSE TAPER MT2 ADAPTER L=27 mm

VDI30 FORM F MORSE TAPER MT2 ADAPTER L=27 mm

VDI30 FORM F MORSE TAPER MT3 ADAPTER L=73 mm

VDI30 FORM F MORSE TAPER MT3 ADAPTER L=73 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 65 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 65 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 85 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L= 85 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=65 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=65 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 1)" L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=85 mm P=59.5 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=85 mm P=59.5 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 65 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 65 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 65 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 65 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 85 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L= 85 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=100 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=120 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=120 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=120 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=120 mm W=35 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=125 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=125 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=32 mm L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=85 mm P=48 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=85 mm P=59.5 mm

VDI30 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=85 mm P=59.5 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L=100 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L=100 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L=100 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1- 1/ 4)" L=100 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=113 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=113 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=137 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=( 1)" L=137 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=113 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=113 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=137 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=25 mm L=137 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L=100 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER 2xID=32 mm L=100 mm W=35 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=113 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=113 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=137 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=( 1)" x2 L=137 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=25 mm x2 L=113 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=25 mm x2 L=113 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=25 mm x2 L=137 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=25 mm x2 L=137 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=32 mm x2 L=100 mm P=48 mm

VDI30 FORM T1 RADIAL DOUBLE BORING BAR HOLDER ID=32 mm x2 L=100 mm P=48 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=( 1)" L=128 mm W=35 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=( 1)" L=128 mm W=35 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=25 mm L=128 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=25 mm L=128 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=25 mm L=128 mm W=35 mm

VDI30 FORM T1 RADIAL TRIPLE BORING BAR HOLDER 3xID=25 mm L=128 mm W=35 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=100 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=120 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=65 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=65 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=( 1- 1/ 4)" L=85 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 65 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 65 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 85 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L= 85 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L=100 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L=100 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L=120 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=(1-1/4)" L=120 mm W35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 65 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 65 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 85 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L= 85 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=100 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=100 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=100 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=100 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=120 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=120 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=120 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=120 mm W=35

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=65 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=65 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=85 mm

VDI30 FORM T2 RADIAL DOUBLE COLLET CHUCK 2xER25 BORING BAR HOLDER ID=32 mm L=85 mm

VDI30 TEST BAR X AXIS L=100 mm

VDI30 TEST BAR X AXIS L=100 mm

VDI30 TEST BAR Z AXIS L=115 mm

VDI30 TEST BAR Z AXIS L=115 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" OFFSET L=80 mm LEFT HAND

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" OFFSET L=80 mm LEFT HAND

Not found?

Give us more details about your machine

* Fields are required



We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies