your tool holder shop

For more details or to order, please select: Power chuck

Power chuck
A00 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218	N-200 Type 3-jaw Through-Hole Power Chucks used with large bores. Adapter is excluded. L30000769
Power chuck N-204
Power chuck N-205
Power chuck N-206
Power chuck N-208
Power chuck N-210
Power chuck N-212
Power chuck N-215
Power chuck N-220
Power chuck N-224

Power chuck
A08 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A8	N-200A Type 3-jaw Through-Hole Power Chuck Among wedge type power chucks N-200A Type is used with largest bores N-200A type Chucks are assembled with adapter for ASA B5.9 type A spindles Adapter is included OEM Part Code: Kitagawa #B-200A L30000770
A11 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A11
A15 THROUGH HOLE POWER CHUCK 18" 3 JAWS N218A15
Power chuck N-205A4
Power chuck N-205A5
Power chuck N-206A5
Power chuck N-208A5
Power chuck N-208A6
Power chuck N-210A6
Power chuck N-210A8
Power chuck N-212A11
Power chuck N-212A6
Power chuck N-212A8
Power chuck N-215A11
Power chuck N-215A8
Power chuck N-220A11
Power chuck N-220A15
Power chuck N-224A11
Power chuck N-224A15

Power chuck
A4 THROUGH HOLE POWER CHUCK 6" 2 JAW	NT-200A Type 2-jaw Through-Hole Power Chuck All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw Base jaw: 1.5mm x 60° serration Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles Adapter is included OEM Part Code: Kitagawa #BT-200A L30000771
A5 THROUGH HOLE POWER CHUCK 6" 2 JAW
Power chuck NT-205A4
Power chuck NT-208A5
Power chuck NT-208A6
Power chuck NT-210A6
Power chuck NT-210A8
Power chuck NT-212A11
Power chuck NT-212A8
Power chuck NT-215A11
Power chuck NT-215A8
Power chuck NT-218A11
Power chuck NT-218A15
Power chuck NT-218A8

Power chuck
A11 THROUGH HOLE POWER CHUCK 12" 4 JAWS	NIT-200A Type 4-jaw Through-Hole Power Chuck All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each master jaw Master jaw: 1.5mm x 60° serration Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles Adapter: included L30000778
A11 THROUGH HOLE POWER CHUCK 15" 4 JAWS
A11 THROUGH HOLE POWER CHUCK 18" 4 JAWS
A11 THROUGH HOLE POWER CHUCK 24" 4 JAWS
A15 THROUGH HOLE POWER CHUCK 18" 4 JAWS
A15 THROUGH HOLE POWER CHUCK 24" 4 JAWS
A5 THROUGH HOLE POWER CHUCK 6" 4 JAWS
A5 THROUGH HOLE POWER CHUCK 8" 4 JAWS
A6 THROUGH HOLE POWER CHUCK 8" 4 JAWS
A6 THROUGH HOLE POWER CHUCK 8" 4 JAWS (M60x1.5)
A8 THROUGH HOLE POWER CHUCK 10" 4 JAWS
A8 THROUGH HOLE POWER CHUCK 12" 4 JAWS
A8 THROUGH HOLE POWER CHUCK 15" 4 JAWS
A8 THROUGH HOLE POWER CHUCK 18" 4 JAWS

Power chuck
Power chuck NHT-208A5	NHT-200A Type 2-jaw and 3-jaw Through-Hole Power Chuck The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground to increase running accuracy and longer service life Gripping of round or irregular workpiece does not need to change the chuck The chucks are designed according to ASA B5.9 type A spindle Adapter is included L30000779
Power chuck NHT-208A6

Power chuck
Power chuck NB-208A6	NB-200A Type 3-jaw extra large Through-Hole Power Chuck Approximately 20% higher speed, higher gripping force and larger bore compared with regular chucks The NB-200A Type chucks are designed according to ASA B5.9 type A spindle The chucks are made from high grade alloy steel. All sliding surfaces are hardened and ground for accurate actual running and long service repeatability Adapter is included L30000782
Power chuck NB-210A8
Power chuck NB-212A11
Power chuck NB-212A6
Power chuck NB-212A8
Power chuck NB-215A15
Power chuck NB-215A8
Power chuck NB-2185A15
Power chuck NB-306A5

Power chuck
CHUCK POWER 06" TYPE V-206 OEM KITAGAWA N-206 B-206	3-jaw Wedge-type non Through-Hole Power Chuck The chucks are of high performance similar with N-series Metric or UNC socket head cap screws are supplied for installing the chuck to the spindle Adapter is excluded OEM Part Code: Kitagawa #N-200 L30000783
CHUCK POWER 08" TYPE V-208 OEM KITAGAWA N-208
CHUCK POWER 10" TYPE V-210 OEM KITAGAWA N-210
CHUCK POWER 12" TYPE V-212 OEM KITAGAWA N-212
CHUCK POWER 15" TYPE V-215 OEM KITAGAWA N-215
CHUCK POWER 18" TYPE V-218 OEM KITAGAWA N-218

Power chuck
Power chuck VIT-212A8	2-jaw and 4-jaw Wedge type Non Through-Hole Power Chuck Suitable for special applications - to hold special shape workpieces, such as square bar or flanges which are not possible to be clamped by a 3-jaw chuck Model VT-200A & VIT-200A chucks are interchangable with those of V-200 or V-200A series They are also featured by high performance as V-type chucks, and have the same basic dimensions Adapter included L30000784
Power chuck VIT-218
Power chuck VT-206A4
Power chuck VT-206A5
Power chuck VT-208A5
Power chuck VT-208A6
Power chuck VT-210A6
Power chuck VT-210A8
Power chuck VT-212A11
Power chuck VT-212A8
Power chuck VT-215A8

Power chuck
Power chuck DN-08	Vertical and Vertical/Horizontal Stationary Power Chuck DV/DN type power chucks are suitable for vertical milling and drilling operations Due to large through-hole, the vertical/horizontal power chucks clamp not only the long workpiece but also the horizontal holding L30000785
STATIONARY PNEUMATIC POWER CHUCK 4" 3 SOFT JAWS WITH CYLINDER
STATIONARY PNEUMATIC POWER CHUCK 5" 3 SOFT JAWS WITH CYLINDER
STATIONARY PNEUMATIC POWER CHUCK 6" 3 SOFT JAWS WITH CYLINDER
STATIONARY PNEUMATIC POWER CHUCK 8" 3 SOFT JAWS WITH CYLINDER

Power chuck
CHUCK POWER 06" TYPE V-206 ADAPTOR A5	3-jaw Wedge-type non Through-Hole Power Chuck The chucks are of high performance similar with N-series Metric or UNC socket head cap screws are supplied for installing the chuck to the spindle Alternative spindle adaptors ASA or DIN can be used Adapter is included OEM Part Code: Kitagawa #N-200A L30000786
CHUCK POWER 06" TYPE V-206 ADAPTOR A6
CHUCK POWER 08" TYPE V-208 ADAPTOR A5
CHUCK POWER 08" TYPE V-208 ADAPTOR A6
CHUCK POWER 08" TYPE V-208 ADAPTOR A8
CHUCK POWER 10" TYPE V-210 ADAPTOR A11
CHUCK POWER 10" TYPE V-210 ADAPTOR A6
CHUCK POWER 10" TYPE V-210 ADAPTOR A8
CHUCK POWER 12" TYPE V-212 ADAPTOR A11
CHUCK POWER 12" TYPE V-212 ADAPTOR A6
CHUCK POWER 12" TYPE V-212 ADAPTOR A8
CHUCK POWER 15" TYPE V-215 ADAPTOR A11
CHUCK POWER 15" TYPE V-215 ADAPTOR A15
CHUCK POWER 15" TYPE V-215 ADAPTOR A8
CHUCK POWER 18" TYPE V-218 ADAPTOR A11
CHUCK POWER 18" TYPE V-218 ADAPTOR A15
CHUCK POWER 18" TYPE V-218 ADAPTOR A8

Power chuck
CHUCK POWER 12" TYPE V-212R ADAPTOR A11	Non Through-Hole Power Chuck for vertical lathe The front protection of slide way Suitable for vertical lathe Adapter is included L30000788
CHUCK POWER 12" TYPE V-212R ADAPTOR A15
CHUCK POWER 12" TYPE V-212R ADAPTOR A8
CHUCK POWER 15" TYPE V-215R ADAPTOR A11
CHUCK POWER 15" TYPE V-215R ADAPTOR A15
CHUCK POWER 15" TYPE V-215R ADAPTOR A8
CHUCK POWER 18" TYPE V-218R ADAPTOR A11
CHUCK POWER 18" TYPE V-218R ADAPTOR A8
CHUCK POWER 21" TYPE V-221R ADAPTOR A11
CHUCK POWER 21" TYPE V-221R ADAPTOR A15
CHUCK POWER 24" TYPE V-224R ADAPTOR A11
CHUCK POWER 24" TYPE V-224R ADAPTOR A15
CHUCK POWER 32" TYPE V-232R ADAPTOR A11
CHUCK POWER 32" TYPE V-232R ADAPTOR A15
Power chuck V-218RA15
Power chuck VIT-212RA8
Power chuck VIT-218RA11
Power chuck VIT-224RA15
Power chuck VIT-232RA15

Power chuck
Power chuck NT-205	NT-200 Type 2-jaw Through-Hole Power Chuck All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw Base jaw: 1.5mm x 60° serration Mounting: Adapter mounting to fit with DIN, ISO, BS, ASA B5.9 type A spindles Adapter: not included L30000834
Power chuck NT-208
Power chuck NT-210
Power chuck NT-212
Power chuck NT-215-1
Power chuck NT-215-2
THROUGH HOLE POWER CHUCK 6" 2 JAW

Power chuck
Power chuck OZ103	L30000937
Power chuck OZ123
Power chuck OZ153
Power chuck OZ603
Power chuck OZ803
THROUGH HOLE POWER CHUCK 5" 3 JAW

Power chuck
Power chuck OZ104	L30000938
Power chuck OZ124
Power chuck OZ154
Power chuck OZ604
Power chuck OZ804

Power chuck
Power chuck OZ1013	L30000939
Power chuck OZ6213
Power chuck OZ8213

Power chuck
Power chuck OZ102	L30000940
Power chuck OZ122
Power chuck OZ802

Power chuck
Power chuck DR-08	DR Type 3-jaw Draw Down Power Chucks for machining casting and forging parts Radial clamping ensures almost no uplifting displacement of workpiece The clampped workpiece is appressed to the surtace thus making the DR Type chucks suitable for heavy machining Chuck actuators with cylindrical structure are durable and ensure high clamping repeatability Accurate self-centering and pull back features ensure precise length control machining requirements L30000991
Power chuck DR-08A6

Power chuck

Power chuck BL-12

BL Type 3-jaw Ball Swing Lock Chuck These chucks can attract the workpiece and hold it on. The jaw operates in two stages: clamping and pulling back, so it can hold the workpiece exactly on the position in front of the chuck, and make it under the stabile situation The BL Type chuck can grasp the workpiece on both O.D. and I.D. clamping, and switch between O.D. and I.D. clamping modes by a simple operation The chuck can grasp up to a 20 degree taper when using a clipper, so the discard process can be ignored on the chucking part of the workpiece The jaw is self-equalizing to max 5° on the O.D. clamping, so it can grasp the workpiece steady Dustproof performance is excellent, and different from regular general purpose chucks. It is structurally dustproof, as there is a dustproof seal in the part of lock arm to prevent the dust ingress L30000992

Click the links above for product's details or call us at

The information provided for reference purposes only. Although all possible efforts were made to make this information accurate, we can not guarantee that particular part will fit your application. Specifications can be changed without prior notice. All prices are for reference only and can be changed without prior notice. Not all models are available in all countries due to possible patents and other restrictions.