Milling Collet Chuks have taper ground to ISO-AT3 with roundness RZ 2.5.
Runout of Milling Collet Chucks is less than 0.005 mm.
Standard balance of Milling Collet Chucks is 8000 rpm at G6.3.
Milling Collet Chuks with higher balance accuracy can be ordered by request.
Special design of Milling Collet Chucks allows nuts to keep tightly with collets during operation.
L20000050

For more details or to order, please select: CNC Collet Chuck Milling

CNC Collet Chuck Milling
BT30 COLLET CHUCK ER11 L= 60 mm
ER Collet Holders are most suitable for normal accuracy machining jobs including drilling, milling, reaming and tapping. ER Collet Holders give very good performance vs price ratio.
ER Collet Holders’ standard balance is 8000 rpm/G6.3; higher balance grade is available on special order. The runout accuracy of ER Collet Holders’ bore taper is not less than 0.005 mm. The standard ER Collet Holder shank is 7/24 taper according to ISO-AT3 with surface roughness Rz 2.5.
ER Clamping Nuts are balanced dynamically and allow higher speed of ER Collet Holders. There is a choice of smaller diameter ER Clamping Nuts designated as Type M. Please indicate when ordering.

CAUTION: In order to avoid damage - don't tighten the ER Clamping Nuts on more than indicated maximum torques.
Collets, pull studs, coolant pipes and spanners should be ordered additionally.
L30000120
BT30 COLLET CHUCK ER11 L=100 mm
BT30 COLLET CHUCK ER16 L= 45 mm
BT30 COLLET CHUCK ER16 L= 60 mm
BT30 COLLET CHUCK ER16 L=100 mm
BT30 COLLET CHUCK ER16M L= 60 mm
BT30 COLLET CHUCK ER16M L= 80 mm
BT30 COLLET CHUCK ER16M L=100 mm
BT30 COLLET CHUCK ER20 L= 60 mm
BT30 COLLET CHUCK ER20 L=100 mm
BT30 COLLET CHUCK ER20M L= 80 mm
BT30 COLLET CHUCK ER20M L=100 mm
BT30 COLLET CHUCK ER25 L= 60 mm
BT30 COLLET CHUCK ER25 L=100 mm
BT30 COLLET CHUCK ER25 L=135 mm
BT30 COLLET CHUCK ER25A L= 22 mm STUBBY
BT30 COLLET CHUCK ER32 L= 50 mm
BT30 COLLET CHUCK ER32 L= 60 mm
BT30 COLLET CHUCK ER32 L=100 mm
BT30 COLLET CHUCK ER40 L= 80 mm
BT40 COLLET CHUCK ER10 L= 80 mm
BT40 COLLET CHUCK ER10 L=100 mm
BT40 COLLET CHUCK ER10 L=150 mm
BT40 COLLET CHUCK ER10 L=200 mm
BT40 COLLET CHUCK ER11 L= 60 mm
BT40 COLLET CHUCK ER11 L=100 mm
BT40 COLLET CHUCK ER11A L=100 mm
BT40 COLLET CHUCK ER11M L= 70 mm
BT40 COLLET CHUCK ER11M L=100 mm
BT40 COLLET CHUCK ER11M L=160 mm
BT40 COLLET CHUCK ER16 L= 60 mm
BT40 COLLET CHUCK ER16 L= 70 mm
BT40 COLLET CHUCK ER16 L=100 mm
BT40 COLLET CHUCK ER16 L=150 mm
BT40 COLLET CHUCK ER16 L=160 mm
BT40 COLLET CHUCK ER16M L= 70 mm
BT40 COLLET CHUCK ER16M L=100 mm
BT40 COLLET CHUCK ER16M L=120 mm
BT40 COLLET CHUCK ER16M L=150 mm
BT40 COLLET CHUCK ER16M L=160 mm
BT40 COLLET CHUCK ER20 L= 60 mm
BT40 COLLET CHUCK ER20 L= 70 mm
BT40 COLLET CHUCK ER20 L=100 mm
BT40 COLLET CHUCK ER20 L=150 mm
BT40 COLLET CHUCK ER20 L=160 mm
BT40 COLLET CHUCK ER20 L=200 mm
BT40 COLLET CHUCK ER20M L=100 mm
BT40 COLLET CHUCK ER20M L=120 mm
BT40 COLLET CHUCK ER20M L=160 mm
BT40 COLLET CHUCK ER25 L= 70 mm
BT40 COLLET CHUCK ER25 L= 80 mm
BT40 COLLET CHUCK ER25 L=100 mm
BT40 COLLET CHUCK ER25 L=100 mm
BT40 COLLET CHUCK ER25 L=135 mm
BT40 COLLET CHUCK ER25 L=150 mm
BT40 COLLET CHUCK ER25 L=160 mm
BT40 COLLET CHUCK ER25 L=200 mm
BT40 COLLET CHUCK ER25 L=60 mm
BT40 COLLET CHUCK ER25M L=070 mm
BT40 COLLET CHUCK ER25M L=100 mm
BT40 COLLET CHUCK ER25M L=120 mm
BT40 COLLET CHUCK ER25M L=160 mm
BT40 COLLET CHUCK ER32 L= 70 mm
BT40 COLLET CHUCK ER32 L=100 mm
BT40 COLLET CHUCK ER32 L=100 mm
BT40 COLLET CHUCK ER32 L=150 mm
BT40 COLLET CHUCK ER32 L=160 mm
BT40 COLLET CHUCK ER32 L=200 mm
BT40 COLLET CHUCK ER32 L=300 mm
BT40 COLLET CHUCK ER32 L=330 mm
BT40 COLLET CHUCK ER32 L=60 mm
BT40 COLLET CHUCK ER32A L= 32 mm STUBBY
BT40 COLLET CHUCK ER40 L= 70 mm
BT40 COLLET CHUCK ER40 L=100 mm
BT40 COLLET CHUCK ER40 L=160 mm
BT40 COLLET CHUCK ER50 L=100 mm
CNC Collet Chuck Milling
SK40 COLLET CHUCK ER11 L=100 mm

L30000121
SK40 COLLET CHUCK ER16 L= 60 mm
SK40 COLLET CHUCK ER16 L=100 mm
SK40 COLLET CHUCK ER16 L=150 mm
SK40 COLLET CHUCK ER20 L= 60 mm
SK40 COLLET CHUCK ER20 L=100 mm
SK40 COLLET CHUCK ER20 L=120 mm
SK40 COLLET CHUCK ER20 L=150 mm
SK40 COLLET CHUCK ER25 L=100 mm
SK40 COLLET CHUCK ER25 L=150 mm
SK40 COLLET CHUCK ER25 L=60 mm
SK40 COLLET CHUCK ER32 L= 70 mm
SK40 COLLET CHUCK ER32 L=100 mm
SK40 COLLET CHUCK ER32 L=150 mm
SK40 COLLET CHUCK ER40 L= 80 mm
SK40 COLLET CHUCK ER40 L=100 mm
SK40 COLLET CHUCK ER40 L=150 mm
SK50 COLLET CHUCK ER16 L=100 mm
SK50 COLLET CHUCK ER16 L=150 mm
SK50 COLLET CHUCK ER16 L=60 mm
SK50 COLLET CHUCK ER20 L=100 mm
SK50 COLLET CHUCK ER20 L=150 mm
SK50 COLLET CHUCK ER25 L=100 mm
SK50 COLLET CHUCK ER25 L=150 mm
SK50 COLLET CHUCK ER32 L=100 mm
SK50 COLLET CHUCK ER32 L=150 mm
SK50 COLLET CHUCK ER32 L=200 mm
SK50 COLLET CHUCK ER40 L=100 mm
SK50 COLLET CHUCK ER40 L=150 mm
CNC Collet Chuck Milling
CAT40 COLLET CHUCK ER20 L= 70 mm

L30000122
CAT40 COLLET CHUCK ER20 L=100 mm
CAT40 COLLET CHUCK ER20 L=160 mm
CAT40 COLLET CHUCK ER25 L= 70 mm
CAT40 COLLET CHUCK ER25 L=(4)"
CAT40 COLLET CHUCK ER25 L=100 mm
CAT40 COLLET CHUCK ER25 L=160 mm
CAT40 COLLET CHUCK ER32 L= 70 mm
CAT40 COLLET CHUCK ER32 L=100 mm
CAT40 COLLET CHUCK ER32 L=160
CAT40 COLLET CHUCK ER40 L= 70 mm
CAT50 COLLET CHUCK ER25 L= 70 mm
CAT50 COLLET CHUCK ER25 L=100 mm
CAT50 COLLET CHUCK ER25 L=160 mm
CAT50 COLLET CHUCK ER32 L= 80 mm
CAT50 COLLET CHUCK ER32 L=100 mm
CAT50 COLLET CHUCK ER32 L=160 mm
CAT50 COLLET CHUCK ER40 L= 80 mm

Click the links above for product's details or call us at

The information provided for reference purposes only. Although all possible efforts were made to make this information accurate, we can not guarantee that particular part will fit your application. Specifications can be changed without prior notice. All prices are for reference only and can be changed without prior notice. Not all models are available in all countries due to possible patents and other restrictions.