Home >> Lathes >> JOHNFORD >> JOHNFORD HT-35-2D TURRET TBMA-250 VDI50 SPUR-MT TURRET AXIAL, VDI 50, SPUR-MT,

JOHNFORD HT-35-2D TURRET TBMA-250 VDI50 SPUR-MT TURRET AXIAL, VDI 50, SPUR-MT,


JOHNFORD HT-35-2D TURRET TBMA-250 VDI50 SPUR-MT

Tool holders for JOHNFORD HT-35-2D TURRET TBMA-250 VDI50 SPUR-MT.We will find a tool holder for JOHNFORD HT-35-2D TURRET TBMA-250 VDI50 SPUR-MT.

AXIAL, VDI 50, SPUR-MT,

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 10

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=55 mm

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=32 mm L=55 mm

In Stock 10

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 10

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=32 mm L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=55 mm

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=55 mm

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=32 mm L=55 mm

In Stock 10

VDI50 FORM C1 TURNING HOLDER RIGHT H=32 mm L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=32 mm L=50 mm

In Stock 10

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

In Stock 10

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

In Stock 10

VDI50 FORM D1 TRIPLE TURNING HOLDER H=32 mm OR 25 mm L=85 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=32 mm OR 25 mm L=85 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

VDI50 FORM E1 U-DRILL HOLDER ID=20 mm L=67 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=25 mm L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=25 mm L=80 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=32 mm L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=32 mm L=80 mm

In Stock 10

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=10 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=12 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=16 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=20 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=25 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=32 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=40 mm L=90 mm

In Stock 10

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm L=95 mm

In Stock 10

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

In Stock 6

VDI50 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1/ 2)" L=90 mm

In Stock 6

VDI50 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 5/ 8)" L=90 mm

In Stock 6

VDI50 WEDGE ECCENTRIC OD=36 mm

VDI50 WEDGE ECCENTRIC OD=36 mm

In Stock 6

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B1 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 5

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=32 mm L=120 mm

In Stock 5

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

In Stock 5

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=100 mm

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=100 mm

In Stock 5

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=125 mm

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=125 mm

In Stock 5

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B2 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 4

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B4 TURNING HOLDER LEFT SHORT H=( 1- 1/ 4)" L=55 mm

In Stock 4

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=100 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=100 mm

In Stock 4

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B7 TURNING HOLDER RIGHT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

In Stock 3

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B8 TURNING HOLDER LEFT OVERHEAD LONG H=( 1- 1/ 4)" L=55 mm

In Stock 3

VDI50 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=50 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=50 mm

In Stock 3

VDI50 FORM A1 BLANK H=160 mm L=125 mm

VDI50 FORM A1 BLANK H=160 mm L=125 mm

In Stock 2

VDI50 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM C4 TURNING HOLDER LEFT H=( 1- 1/ 4)" L=55 mm

In Stock 2

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 4)" L=80 mm

In Stock 2

VDI50 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 3/ 4)" L=67 mm

In Stock 2

VDI50 FORM A1 BLANK H=160 mm L=140 mm

VDI50 FORM A1 BLANK H=160 mm L=140 mm

In Stock 1

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=32 mm OR 25 mm L=55 mm

In Stock 1

VDI50 FORM C4 TURNING HOLDER LEFT H=32 mm or 25 mm L=55 mm

VDI50 FORM C4 TURNING HOLDER LEFT H=32 mm or 25 mm L=55 mm

In Stock 1

VDI50 COMPENSATING TAPPING COLLET CHUCK ER32 L=83 mm

VDI50 COMPENSATING TAPPING COLLET CHUCK ER32 L=83 mm

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B3 TURNING HOLDER RIGHT SHORT H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B5 TURNING HOLDER RIGHT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG H=( 1- 1/ 4)" L=55 mm

VDI50 FORM B6 TURNING HOLDER LEFT LONG SQUARE H=( 1- 1/ 4)" L=55 mm UNDERCUT

VDI50 FORM B6 TURNING HOLDER LEFT LONG SQUARE H=( 1- 1/ 4)" L=55 mm UNDERCUT

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=( 1)" L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=25 mm L=50 mm

VDI50 FORM C1 TURNING HOLDER RIGHT H=25 mm L=50 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C1-B1 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=( 1)" L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=25 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=32 mm L=55 mm

VDI50 FORM C2 AXIAL TURNING HOLDER LEFT H=32 mm L=55 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C2-B2 AXIAL-RADIAL TURNING HOLDER LEFT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=32 mm OR 25 mm L=50 mm

VDI50 FORM C3 TURNING HOLDER RIGHT H=32 mm OR 25 mm L=50 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C3-B3 AXIAL-RADIAL TURNING HOLDER RIGHT H=( 1- 1/ 4)" L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM C4-B4 AXIAL-RADIAL TURNING HOLDER LEFT H=32 mm OR 25 mm L=120 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D1 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TRIPLE TURNING HOLDER H=( 1- 1/ 4)" L=85 mm

VDI50 FORM D2 TURNING HOLDER H=32 mm L=85 mm

VDI50 FORM D2 TURNING HOLDER H=32 mm L=85 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 1)" L=80 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=100 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=125 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=125 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=( 2)" L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=40 mm L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=135 mm

VDI50 FORM E1 U-DRILL HOLDER ID=50 mm L=135 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 2)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1- 1/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 1)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" L=95 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" OFFSET L=80 mm RIGHT HAND

VDI50 FORM E2 BORING BAR HOLDER ID=( 2)" OFFSET L=80 mm RIGHT HAND

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 4)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=( 3/ 8)" L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=30 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=30 mm L=90 mm

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm OFFSET L=80 mm RIGHT HAND

VDI50 FORM E2 BORING BAR HOLDER ID=50 mm OFFSET L=80 mm RIGHT HAND

VDI50 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI50 FORM E3 COLLET CHUCK OZ25 L=75 mm

VDI50 FORM E3 COLLET CHUCK OZ32 mm L=90 mm

VDI50 FORM E3 COLLET CHUCK OZ32 mm L=90 mm

VDI50 FORM E4 COLLET CHUCK ER40 INTERNAL COOLANT L=75 mm

VDI50 FORM E4 COLLET CHUCK ER40 INTERNAL COOLANT L=75 mm

VDI50 FORM E4 COLLET CHUCK ER40 L=75 mm

VDI50 FORM E4 COLLET CHUCK ER40 L=75 mm

VDI50 FORM E7 DOUBLE BORING BAR HOLDER LEFT ID=( 2)" x2 L=80 mm COOLANT THROUGH

VDI50 FORM E7 DOUBLE BORING BAR HOLDER LEFT ID=( 2)" x2 L=80 mm COOLANT THROUGH

VDI50 FORM E7 DOUBLE BORING BAR HOLDER LEFT ID=50mm x2 L=80 mm

VDI50 FORM E7 DOUBLE BORING BAR HOLDER LEFT ID=50mm x2 L=80 mm

VDI50 FORM E7 DOUBLE BORING BAR HOLDER RIGHT ID=( 2)" x2 L=80 mm COOLANT THROUGH

VDI50 FORM E7 DOUBLE BORING BAR HOLDER RIGHT ID=( 2)" x2 L=80 mm COOLANT THROUGH

VDI50 FORM F MORSE TAPER MT1 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT1 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT2 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT3 ADAPTER L=36 mm

VDI50 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI50 FORM F MORSE TAPER MT4 ADAPTER L=50 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 1- 1/ 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=( 2)" L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=100 mm P=64 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=40 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=100 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=120 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=145 mm

VDI50 FORM T1 RADIAL BORING BAR HOLDER ID=50 mm L=145 mm

VDI50 FORM Z2 PLUG STEEL OD=98 mm L=20 mm

VDI50 FORM Z2 PLUG STEEL OD=98 mm L=20 mm

VDI50 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI50 KEYLESS DRILL CHUCK ID=13 mm L=85 mm

VDI50 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI50 KEYLESS DRILL CHUCK ID=16 mm L=90 mm

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm LEFT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CCW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CW

VDI50 SPUR MT RADIAL TAPPING HEAD ER25 L= 75 mm RIGHT HAND CW-CW

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=123 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=123 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=134 mm INTERNAL COOLANT

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 L=134 mm INTERNAL COOLANT

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 OFFSET L= 65 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40 OFFSET L= 65 mm

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40A L=121 mm COMPACT INTERNAL COOLANT

VDI50 SPUR-MT AXIAL DRILLING MILLING HEAD ER40A L=121 mm COMPACT INTERNAL COOLANT

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=117 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 22 mm L=117 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 27 mm L=123 mm

VDI50 SPUR-MT AXIAL FACING MILLING HEAD OD= 27 mm L=123 mm

VDI50 SPUR-MT CMPENSATING TAPPING HEAD ER25 L=123 mm

VDI50 SPUR-MT CMPENSATING TAPPING HEAD ER25 L=123 mm

VDI50 SPUR-MT DRILLING MILLING HEAD ER40 L=75 mm LEFT HAND INTERNAL COOLANT CCW-CW

VDI50 SPUR-MT DRILLING MILLING HEAD ER40 L=75 mm LEFT HAND INTERNAL COOLANT CCW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD ER40 L=75 mm RIGHT HAND INTERNAL COOLANT CW-CCW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD ER40 L=75 mm RIGHT HAND INTERNAL COOLANT CW-CCW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L= 75 mm CW-CW INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L= 75 mm CW-CW INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=75 mm INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=90mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD LEFT HAND ER40 L=90mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L= 75 mm CW-CW COOLANT THROUGH

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L= 75 mm CW-CW COOLANT THROUGH

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm CW-CW

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=75 mm INTERNAL COOLANT

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90 mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90 mm BACK SET 49mm

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90mm BACK SET 49mm INT COOLAN

VDI50 SPUR-MT RADIAL DRILLING MILLING HEAD RIGHT HAND ER40 L=90mm BACK SET 49mm INT COOLAN

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm LEFT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm LEFT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm RIGHT HAND CW-CW

VDI50 SPUR-MT RADIAL TAPPING HEAD ER25 L=90 mm BACK SET 54 mm RIGHT HAND CW-CW

VDI50 SPUR-MT UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER25 L=165 mm

VDI50 SPUR-MT UNIVERSAL ADJUSTABLE DRILLING MILLING HEAD ER25 L=165 mm

VDI50 TEST BAR X AXIS L=100 mm

VDI50 TEST BAR X AXIS L=100 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=150 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=150 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=200 mm

VDI50 TEST BAR Z AXIS OD=40 mm L=200 mm

VDI50 TEST BAR Z AXIS OD=50 mm L=115 mm

VDI50 TEST BAR Z AXIS OD=50 mm L=115 mm

Not found?

Give us more details about your machine

* Fields are required



We use cookies on this website to improve functionality and performance, maintain users accounts, to analyse traffic to the website and to enable social media features.
To learn more please see our Customer Service page for Privacy and Cookies Policy.
Accept cookies